Rod & Custom Feature Car
Jim Evans
Hammond, Indiana
1936 Ford Coupe

Chassis
The body needed to sit a little closer to the ground, so Jim added a 5-inch dropped beam axle, reversed the front spring eyes, removed a couple of the stock leaves, stuck homemade lowering blocks between the axle and the pair of parallel rear leaf springs, and cut a pair of C-notches out of the rear of the original framerails. The 'rails were boxed in the rear for rigidity, and the X-member was rebuilt to make it removable in case the transmission needs to be pulled out. The frontend was further modified with tube shocks, spindles, and split 'bones from a '37 Ford, and custom steering arms controlled by a Vega box. Antisway bars were bolted in at the front and rear. The front brakes are from a '56 Ford pickup. Rear brakes come from a '76 Granada, which also provided the 3.55:1 gear rearend.


Drivetrain
One of the star attractions of the '36 is the Ford Y-block. Sterling Engine in Rockford, Illinois, did the machine work on the 312ci Thunderbird engine, rebuilt by Jim. The Ford NASCAR air cleaner is a reminder of the trans-eating dual-quad NASCAR engine dropped between the fenders back in the 1950s. Jim built a base to set it over an Edelbrock 500-cfm carb on a Thunderbird manifold. The stock heads were modified with hardened valve seats with an Isky cam and lifters as part of the valvetrain, and topped with-what else?-the stock Thunderbird covers. Glasspack mufflers barely tone down the Chevy small-block headers, modified by O'Connell Speciaties to fit the Y-block. The Mallory dual-point ignition was converted to PerTronix electronics. Jim grafted Chevy shift linkage to the '36 Ford shifter operating a BorgWarner-built T5 from a '94 S-10 pickup.


Wheels & Tires
Jim chose the rim and tire combo to complement the resto-rod appearance of the coupe. That means 16-inch '40 Ford wheels dressed up with '40 Standard V-8 caps and custom-mix cream-colored paint to match the firewall and steering wheel. The wide-white bias-ply Firestone tires measure 7.00-16 and 5.50-16.


Body & Paint
Starting with desirable original sheetmetal, Jim's plan was to keep the body mods inconspicuous. Maybe you spotted the two additional horizontal bars on the hood panel trims. He also removed the spare tire and shortened the taillight stands and rear bumper supports just enough to pull both in closer to the body. The stock headlights were replaced with slightly updated lights from a '41 cabover pickup truck. The top was finished with a LeBaron Bonney insert. O'Connell Specialties recessed the firewall to fit the Y-block. The coupe went to Ron Kral in Lockport, Illinois, for final body prep and paint. Jim identifies the color as "pimp blue." "It's a long story," he says. Someday we'd love to hear it.


Interior
The stock bench seat was in good shape after 45 years of not being sat on. Covering it in stock wool broadcloth was a great decision, and the crew at Schobers Hot Rod Interior in Yorkville, Illinois, did the job using a LeBarron Bonney kit. The woodgraining on the dashboard and garnish moldings was handled by Cliff McCillop of Rochester Hills, Michigan. Classic Instruments provided the in-dash gauges. A two-piece Sun tach ("that actually works," Jim boasts) is mounted on the custom column. The critical component not shown is the driver. With hands on the '48 wheel and feet on the '39 pedals, Jim fills that function every chance he gets.

Owner contact info: seautoservice3@mcleodusa.net