Sure, we’re bringing you the quintessential hot rod, a red ’32, but this five-window definitely isn’t “just another red ’32”. When we ran into Ray Williams and his coupe at the NSRA Nats in Louisville last summer, the combination of the abundance of louvers and the artillery wheels drew us in closer; our journalistic curiosity piqued.
Seems Ray turned a hobby into a business with what started in 1978 as buying and restoring old aluminum wheels as a sideline. That mutated into restoring and selling magnesium wheels, rare aluminum wheels, vintage speed parts, and Halibrand V-8 quick-change rearends, and today offering ’glass bodies, Thunder Road chassis, and a complete line of Pete & Jakes hot rod parts, at Ray’s Hotrod Garage in Wyoming, Rhode Island.
It’s somewhat ironic, then, that his personal hot rod rolls on 17x4 and 18x4 Plymouth artillery wheels, with the rears re-hooped by Rally America to provide a deeper dish. The Excelsior—and Firestone—shod steels, however, are supplemented by another set of wheels for a totally different look, depending on Ray’s mood. When he feels like a change—and it certainly is a change—he’ll bolt on a pair of Michelin-wrapped 15x4 Halibrands and a couple of 16x10 two-piece ET III rims with 11x16 Firestone Double Diamond rubber!
Fast old cars are in Ray’s blood, as his father raced circle track and built hot rods, and this coupe has been his lifelong dream. The retired machinist’s five-window took two years to build, starting with an excellent original body sourced through
www.fordbarn.com, and located in Cumberland, Rhode Island. He always wanted a car with louvers, and he certainly made sure this was it! In fact, there are a total of 532 on the car (five-window ’32, geddit?), with 198 on the roof insert, 152 on the hood, 12 on the rear spreader bar, 8 on the front, 4 on each headlight, and 3 per taillight, with more on the radiator shroud, all punched by Howard Farwell in Kansas City, Kansas. The wheels aren’t the only thing Ray has two sets of though, as when he got the decklid skin back, complete with 136 louvers perfectly punched, they’d been done upside down! Perhaps the confusion was a result of it being a trunk, and not a rumble seat, with the handle hole at the bottom and not the top? It makes nice wall art though we’re sure, and a great conversation piece! We always like to ask what was the most challenging part of a project build, and believe us, it came as no surprise when Ray said painting, sanding, and buffing around those louvers was definitely at the top of the list.
The only body mod on the coupe is the top chop, performed by Ray to the tune of 2 1/2 inches, though he did fabricate a tray under the louvered insert to catch any rainwater that may enter, which drains through six tubes, one inside each roof pillar. As well as louvers, it seems Ray’s a firm believer in hot rods having three pedals too, as there’s a Tremec five-speed backing the dual four-barrel 358-inch small-block Chevy, with, unsurprisingly given Ray’s occupation, a Winters V-8 quick-change out back, hung on a chrome Model A leaf spring.
Incidentally, Ray listed the quick-change as the coupe’s “stereo” on his spec sheet, and the cowl vent as the “air conditioning”. Hmm … this may look and sound like an old-time hot rod, but you can bet it’s a little quicker than one, given his circle track roots and selection of running gear. No wonder Ray gets behind the wheel as often as he can!
1932 Ford Five-window coupe
The foundation for Ray’s coupe is a Thunder Road Deuce frame, with Model A front and rear crossmembers, and a custom tube X-member, the wheelbase stretched by 1 inch. A 4-inch dropped Super Bell axle is located on hairpins and a Posies spring, all chromed, as are the Pete & Jakes shocks and the backing plates hiding SO-CAL Speed Shop disc brakes. Thunder Road fabricated the pedal assembly, while steering is taken care of by a Vega box.