Been thinking about switching your Tri-Five Chevy from manual to power steering? Then the news from Borgeson about several new parts for just such a conversion should make you smile. How about a steering box based on a Delphi 600 gear, which is a direct fit into Tri-Fives? All Borgeson conversion kits include a new power 'box, pump, mounting bracketry, a double-belt pump pulley, hoses, rag joint, and floor mount. New column shafts are offered as well for those who wish to retain their stock column (ididit columns also available). If you don't need the whole kit, all components are available individually. For more information, contact Borgeson at (860) 482-8283.

Even the youngest fullsize '55-70 Chevy is approaching 40 years old, and would most likely benefit from new bushings in the front suspension. If you're going to go to the trouble of replacing worn-out parts, why not fit components that will increase performance and handling? Makes sense to us, and to Classic Performance Products, who now offers Performance Plus Front End Rebuild Kits.

Each kit contains heat-treated CNC-wound coil springs, Polyplus graphite bushings, and bumpstops that offer improved performance over rubber while preventing squeaks, upper and lower ball joints, inner and outer tie-rod ends, adjuster sleeves, idler arm, strut rod bushings where applicable, as well as three-way adjustable shocks that allow the compression/rebound to be set to 70/30, 50/50, or 40/60 to allow for any road condition. For more information, contact Classic Performance Products at (800) 830-6896.

Got a '55 to early '59 small-block Chevy-the one with the staggered perimeter mount style cylinder heads-and need a set of cool valve covers? PML has just released these sand-cast thick wall aluminum covers with Chevrolet script and fins (reminiscent of the original Corvette seven-fin covers). They use stock gaskets, and as with the original covers, offer no provisions for PCV, breather, or oil filler; but unlike the originals, they'll clear roller rockers thanks to their mid-height design. PML valve covers are available as-cast or polished, or in black or Chevrolet orange powdercoated finishes. Corvette script is also available. For more information, contact PML Inc. at (310) 671-4345.

If you're looking for the sound, torque, and horsepower improvements of an aftermarket muffler but want it in a compact package, Flowmaster has exactly what you need in its new Super 44 mufflers. Wrapped in a 4.00x9.75x13-inch case, the Super 44 is the most aggressive, deepest-sounding, highest-performing 4-inch case street muffler Flowmaster has ever built. The compact size of the new muffler means it will fit in the tightest of locations, and it will fit most any application with inlet and outlet diameters of 2 1/4, 2 1/2, and 3 inches, plus dual inlet (3-inch) and outlet (2 1/2-inch). For more information, contact Flowmaster at (800) 544-4761.