Rod & Custom Homepage Rod & Custom

Building A Fine Ford Street Race Mill

Prev Next
Before you can install the valves, the spring height must be checked and shims installed so all of the springs are set within +/- 0.005-inch of each other.
Building A Fine Ford Street/Race Mill

 Before you can install the valves, the spring height must be checked and shims installed so all of the springs are set within +/- 0.005-inch of each other.  View Related Article

 

Get Adobe Flash player

Car Research Guide
Source Interlink Media © 2008 Rod & Custom,
Source Interlink Media
All rights reserved. WEB-045