Rod & Custom Homepage Rod & Custom

Twin Molded Side Pipes

With the tubing tacked to the rocker panel, the bends were trimmed for a good fit using a small air grinder. Once tacked in place, the bends were removed and "adjusted" a few times before Brad was happy with the way they flowed into the straight sections.
Twin Molded Side Pipes - A Bit On The Side

With the tubing tacked to the rocker panel, the bends were trimmed for a good fit using a small air grinder. Once tacked in place, the bends were removed and "adjusted" a few times before Brad was happy with the way they flowed into the straight sections.  View Related Article

 

Get Adobe Flash player