Rod & Custom Homepage Rod & Custom

Lokar Foot Pedal Emergency Brake

With the screw holes done, we cut the bracket to size based on the lines we traced from the Lokar mounting flange. We waited to make these cuts so we would have something to grip while drilling and chamfering our stud holes. In order to weld in the mounting studs, we first secured them by tightening the Allen screws with nuts and washers to keep them straight. This will ensure the studs don't move as we weld them.
Lokar Foot Pedal Emergency Brake - Dropping Anchor On Brizio's Boat

With the screw holes done, we cut the bracket to size based on the lines we traced from the Lokar mounting flange. We waited to make these cuts so we would have something to grip while drilling and chamfering our stud holes. In order to weld in the mounting studs, we first secured them by tightening the Allen screws with nuts and washers to keep them straight. This will ensure the studs don't move as we weld them.  View Related Article

 

Get Adobe Flash player