Rod & Custom Homepage Rod & Custom

Model A Ladder Bars Hairpins Clevises And Jam Nuts

Prev  Next
Model A Ladder Bars Hairpins Clevises And Jam Nuts
Model A Gets Ladder Bars And Hairpins- Location, Location, Location
The 5/8-18 inch clevises and jam nuts used at the rear end are available from any number of rod parts suppliers, such as Speedway Motors, So-Cal Speed Shop, or Pete & Jakes. They have a -inch hole although 3/8-inch hole versions are used for front hairpins. The slots in the clevises measure 3/8 inch. CCHR fabricate their own axle brackets from 3/8-inch steel though they're available from the same parts suppliers as the clevises. View Related Article
Model A Ladder Bars Hairpins Weld Model A Ladder Bars Hairpins Underneath Model A Ladder Bars Hairpins Simple Jig Model A Ladder Bars Hairpins Drilled To Accept Clevises Model A Ladder Bars Hairpins Base Of Jig Model A Ladder Bars Hairpins Tubing Clamp In Place Model A Ladder Bars Hairpins Bushing Outer Tubing
Model A Ladder Bars Hairpins Components Clamped Model A Ladder Bars Hairpins Tubes Welded Model A Ladder Bars Hairpins Ladder Bars Model A Ladder Bars Hairpins Clevises And Jam Nuts Model A Ladder Bars Hairpins 32 Chassis Model A Ladder Bars Hairpins Rotary Sander Model A Ladder Bars Hairpins Temporary Jig
Model A Ladder Bars Hairpins Tack Weld Model A Ladder Bars Hairpins Welding Bullet End Model A Ladder Bars Hairpins Traditional Looking Hairpins
Chrysler Crossfire Research
Chrysler Crossfire Explore the world with a new Chrysler Crossfire. The 2008 Crossfire goes for a suggested retail price of $34,735.00, and comes with a standard Automatic transmission, and RWD drivetrain. Other similar vehicles are the Chevrolet Suburban and the Cadillac XLR.
Get Adobe Flash player
Source Interlink Media © 2009 Rod & Custom,
Source Interlink Media
All rights reserved. WEB-064