Rod & Custom Homepage Rod & Custom

Model A Ladder Bars Hairpins Welding Bullet End

Prev  Next
Model A Ladder Bars Hairpins Welding Bullet End
Model A Gets Ladder Bars And Hairpins- Location, Location, Location
The short "bullet" end sections of the hairpins were machined from solid steel bar, with a point on one end and an 11/16-18 inch thread in the other to accept Ford tie rod ends. The tubes and end were clamped in the temporary jig making sure the curves of the upper and lower tubes perfectly matched on the "bullet," before welding commenced. View Related Article
Model A Ladder Bars Hairpins Weld Model A Ladder Bars Hairpins Underneath Model A Ladder Bars Hairpins Simple Jig Model A Ladder Bars Hairpins Drilled To Accept Clevises Model A Ladder Bars Hairpins Base Of Jig Model A Ladder Bars Hairpins Tubing Clamp In Place Model A Ladder Bars Hairpins Bushing Outer Tubing
Model A Ladder Bars Hairpins Components Clamped Model A Ladder Bars Hairpins Tubes Welded Model A Ladder Bars Hairpins Ladder Bars Model A Ladder Bars Hairpins Clevises And Jam Nuts Model A Ladder Bars Hairpins 32 Chassis Model A Ladder Bars Hairpins Rotary Sander Model A Ladder Bars Hairpins Temporary Jig
Model A Ladder Bars Hairpins Tack Weld Model A Ladder Bars Hairpins Welding Bullet End Model A Ladder Bars Hairpins Traditional Looking Hairpins
Chrysler Crossfire Research
Chrysler Crossfire Explore the world with a new Chrysler Crossfire. The 2008 Crossfire goes for a suggested retail price of $34,735.00, and comes with a standard Automatic transmission, and RWD drivetrain. Other similar vehicles are the Chevrolet Suburban and the Cadillac XLR.
Get Adobe Flash player
Source Interlink Media © 2009 Rod & Custom,
Source Interlink Media
All rights reserved. WEB-036