1937 Plymouth Sedan Headlights - Lighten Up

The stock retaining clips were installed into the Headwinds mounting ring.

The new Headwinds mounting ring was placed in the old bucket by rotating it until the tension spring clips aligned with the tension springs on the bucket.

A screwdriver was used to pull the retention spring clips through the retention spring to hold the new mounting ring in place.

The new wiring and pigtail were installed in the bucket and then the new lamp was plugged in.

The lamp was placed into the mounting ring and then the new Headwinds beauty ring was installed.

The lamp and beauty ring assembly was then depressed so that the stock trim/retaining ring could be installed starting at the bottom of the housing.

The finished installation follows the natural, original curve of the vintage headlight, keeping that classic look and feel.

If you want a little more modern look, you can now use any 7-inch S.A.E. lamp in your stock housing, enabling you to choose from lamps with built-in turn signal, tri-bars, snake eyes, and more.