|
The Unisteer Cross Steer rack includes a 90-degree mounting bracket. On the Vega box replacement system, the mounting bracket is drilled for installation in the existing box mounting holes on the frame. Since a Vega box was not previously used on this car, the bracket was removed from the rack and clamped onto the frame. The rack and drag link were temporarily installed to make sure the position of the drag link was parallel to the tie rod, in order to prevent bumpsteer. With the sedan lowered onto jackstands and the weight of the car on the suspension, Steve checked to make sure the tie rod and drag link were, in fact, parallel and level. View Related Article
|
|