10 I mounted the Aeromotive fuel filter inside the lefthand chassis rail, fabricating a small bracket and welding it to the top of the 'rail as the aluminum mount protruded above it. These filters feature a replaceable 10-micron fabric element. Aeromotive recommends running the system for a couple hundred miles then replacing the element, as the fuel system should never be dirtier than when first installed, owing to initial debris in the lines, then routine replacement annually or at 10,000-mile intervals. These filters flow 2,000 pounds per hour with a pressure drop of less than 1 psi and measure 5 1/2 x 2 inches. They also feature ORB-10 ports (more on this later), with fittings available to adapt to AN -10, -8, and -6 line sizes.