|
With the arms connected to the motor, the installation's complete, save for the wiring. According to New Port Engineering's instructions, moving the entire motor assembly left or right on the stock mounting bracket will raise or lower the left and right wipers so you can set them at the same height, then loosening the nut on the motor shaft and pivoting the motor on its bracket (locked in place by a bolt in the slot at the bottom of the bracket-which I've helpfully removed in this shot!) will raise or lower the wipers a like amount. They should be set to park between 1/4 and 1/2 inch above the rubber windshield gasket. View Related Article
|
|