Rod & Custom Homepage Rod & Custom
Facebook Click here to find out more!

Inner And Outer Rear Sheetmetal Overlapping Sections

Prev  Next
 
Inner And Outer Rear Sheetmetal Overlapping Sections
Inner And Outer Rear Sheetmetal Overlapping Sections
[20] Note when I welded the overlapping section I stopped short of the actual edge of the panels. This enabled me to trim the overlapping sections away 3/8 inch from the aperture and butt-weld the joints, so the light unit would be able to fit flush against the bodywork. View Related Article
Inner And Outer Rear Sheetmetal Trunk Inner And Outer Rear Sheetmetal Rear Inner And Outer Rear Sheetmetal Ems Panels Inner And Outer Rear Sheetmetal Trim Inner And Outer Rear Sheetmetal Trunk Space Inner And Outer Rear Sheetmetal New Rear Panel Inner And Outer Rear Sheetmetal Nibbler
Inner And Outer Rear Sheetmetal Trimmed Floor Panel Inner And Outer Rear Sheetmetal New Floor Panel In Place Inner And Outer Rear Sheetmetal Self Tapping Screws Inner And Outer Rear Sheetmetal Marks For Trimming Inner And Outer Rear Sheetmetal Panel Inner And Outer Rear Sheetmetal Panels Tack Welded Inner And Outer Rear Sheetmetal Markings
Inner And Outer Rear Sheetmetal Stepped Lip Inner And Outer Rear Sheetmetal Panels Welded Inner And Outer Rear Sheetmetal Ends Inner And Outer Rear Sheetmetal Drilling Inner And Outer Rear Sheetmetal Nuts And Bolts Inner And Outer Rear Sheetmetal Sections Inner And Outer Rear Sheetmetal Overlapping Sections
Inner And Outer Rear Sheetmetal Light Unit Fits Inner And Outer Rear Sheetmetal Latch Bracket Inner And Outer Rear Sheetmetal Hood Latch Inner And Outer Rear Sheetmetal Installed Latch Inner And Outer Rear Sheetmetal Latch Mounted Inner And Outer Rear Sheetmetal Upper Latch Inner And Outer Rear Sheetmetal Completed Rear
Get Adobe Flash player