Spal Automotive USA
(800) 345-0327
spalusa.com

SPAL "NUOVA" series brushless fans feature completely sealed IP68/IP6K9K-rated waterproof/dustproof motors with integrated power and signal electronics, "soft start" technology (eliminates electrical in-rush spike), digitally controlled for smooth and reliable operation, temperature sensor options for full variable speed control, low weight, high efficiency, low noise, along with excellent resistance to vibration and harshness (NVH) levels.

In addition, the brushless design reduces the number of wear components versus standard brushed technology to deliver extremely long-lasting motor life as well as provide automatic power de-rating to guaranty performance in over-temperature operating conditions.

SPAL brushless technology is specifically designed for applications where low power consumption, fuel economy, low weight, advanced electronic control, and high efficiency are key requirements.

SPAL "NUOVA" series brushless fans have been designed to meet the highest engineering standards for both performance and durability and is recommended for off-road vehicle, muscle car, hot rod, and truck applications, but the application possibilities are virtually endless.


U.S. Radiator Corporation
(323) 826-0965
usradiator.com

For over 40 years, U.S. Radiator has offered the most complete and comprehensive line of "correct appearance and fit" copper/brass radiators for American classic, muscle cars, classic truck, and street rod applications in the industry. Over the last 10 years they have expanded their line of "correct appearance and fit" radiators with their Desert Cooler Aluminum radiators. They now offer four distinctive performance core designs to handle any horsepower and hard-to-cool applications and have been the leader in innovated heat-transfer design. Couple that with their unique Triple Flow design and Low Profile Fan Shroud package and every application from mild to wild is covered.


Evans Cooling System
(888) 990-COOL (2665)
evanscooling.com

Evans Waterless High Performance Coolant provides superior heat protection for all performance engines. High Performance Coolant used with Evans' BBC pump can cool large cubic-inch and supercharged engines. The highest gallon per minute flow rate available on the market is found in Evans' coolant pump due to the custom-designed, high-volume, corrosion-free–coated pump impeller. For competitive show presentation, pumps can be custom ceramic coated or custom color powdercoated. Design a cooling system to successfully cool the most extreme performance engines with the assistance of Evans' technical support team. All Evans Waterless Coolants and pumps are made in the United States. Evans High Performance Coolant is available in specialty performance shops.


Painless Performance Products
(800) 54-WIRES
painlessperformance.com

The Painless F5 Fan Control system gives you complete control of single or dual high-amp cooling fan installations. When you need a solution to control your electric cooling fans that will monitor more than just coolant temperature, the F5 Fan Controller is your answer. This solid-state pulse-width modulated controller has the ability to control your cooling fan speed from 50 percent all the way to 100 percent fan speed based on user programmable settings. The three-position switch delivers full-on manual fan mode, normal temperature regulated fan operation, and full-off fan mode. Rated for one 70-amp or two 35-amp fans, the kit includes all wiring, senders, state-of-the-art electronic control module, connectors and hardware, and a complete installation manual. Metric senders are available for GM Gen III and Gen IV engines too.


The Brassworks
(805) 239-2501
thebrassworks.net

The Brassworks restores and fabricates radiators for classic cars and street rods. After 38 years they have seen it all; chops, channels, split cores, angled headers, fan well reliefs, tank reliefs, and more. Whether you need a custom fabrication or a drop-in replacement, The Brassworks can build it. The Brassworks also constructs obsolete heater cores for classic cars and trucks and copper replacements for more modern vehicles that fail prematurely from electrolysis.


FlowKooler
(800) 342-6759
flowkooler.com

Most engines overheat in stop-and-go traffic, at stoplights, or while cruising. That's where FlowKooler high-flow water pumps perform the best. FlowKooler's pumps have precision-machined billet aluminum impellers that are protected with a military-grade surface coating. With larger diameters, incremental vanes, integrated shrouds, and tighter tolerances FlowKooler's impellers double-flow rates at slow speed and idle. This drops engine temperatures as much as 30 degrees and raises block pressure to prevent hot spots on cylinder walls, steam pockets in the water jacket and system cavitation. A full range of pumps for street rods, muscle cars, and classic trucks are available. Don't worry if you can't find your pump because FlowKooler now rebuilds numbers-matching pumps using their patented impeller designs—stock on the outside with performance on the inside.


Griffin Thermal Products
(800) RACERAD (722-3723)
griffinrad.com

Griffin Thermal Products is proud to introduce the all-new ExactFit series of aluminum radiators. With 30 years of experience in the performance cooling market and one of the largest collections of OEM sample radiators, Griffin has engineered the ExactFit series.

Working with a double focus on precision and performance, the ExactFit products install exactly the same as the OEM component. They offer all of the required mounting tabs, brackets, and spuds to ensure a seamless installation. Optimal performance is achieved by the use of two rows of Griffin exclusive MaxCool 1.25-inch tubing. The wider tube width used in these products creates a greater amount of surface area in the same amount of space. This allows the product to far exceed the performance of common two-row 1-inch radiators.

Backed by the industry's best two-year warranty, the new ExactFit radiators are top of the line.


Restomod Air
(866) 784-4278
restomodair.com

This is the only truly custom aftermarket car A/C system that provides both ultimate style and killer performance to any pro touring build. Restomod Air has the ONLY premium line of complete car A/C systems and components that truly give your pro touring build cutting edge style with customization options and high-performance cooling. Restomod Air will freeze your ass off!

Restomod Air was created because custom car builders wanted more—more technology, more class, more quality, and more performance.

From complete systems, to amazing one-off billet vent designs, this is the new generation in custom A/C. Check out the many patent-pending and award-winning designs online.